Specification:

  • Posts: 45mm x 45mm square 6351-T6 structural alloy or DIA50mm round 6351-T6 structural alloy
  • Handrail: Premier, Oval or Elite
  • Bottom Patch Fitting: Glass held in place at lower edge by an extruded alloy patch fitting
  • Top Patch Fitting: Glass held in place at upper edge by an extruded alloy patch fitting
  • Glass: 6mm or 10mm toughened safety glass. Available in clear, opaque and tinted glass with airspace between handrail and glass
  • Finish: Powdercoated or Anodised
  • All balustrade glazing complies with AS1288 2006 of the Building Code of Australia.
  • All balustrades conform to AS 1170 & 1170.01 – 2002 of the Building Code of Australia.

Design 9 system is suitable for installation on:

CONCRETE -Base Plates

80x60x16mm inverse-bolted base plates attached to 45x45mm square 6351-T6 structural alloy post using 4xM8 stainless steel bolts into tapped threads. Post assembly to be mounted using 12mm stainless steel studs chemically anchored in concrete to a minimum depth of 100mm using Hilti HIT 150 epoxy mortar or equivalent.

CONCRETE -Cored

45x45mm square 6351-T6 structural alloy post to be cored into concrete to a minimum depth of 90mm using non shrink grout, epoxy mortar or equivalent.

TIMBER -Deck Plates

80x60x16mm inverse-bolted base plates attached to 45x45mm square 6351-T6 structural alloy post using 4xM8 stainless steel bolts into tapped threads. Post assembly to be bolted to underfloor timbers using 2x10mm stainless steel coach screws outside post dimensions.

D9

Top Rails

Railsafe toprails 640px