D7 folder shot

Specification:

  • Posts: 45mm x 45mm square 6351-T6 structural alloy or DIA50mm round 6351-T6 structural alloy
  • Handrail: Premier, Oval or Elite
  • Bottom Patch Fitting: Glass held in place at lower edge by an extruded alloy patch fitting
  • Glass: 6mm or 10mm toughened safety glass. Available in clear, opaque and tinted glass
  • Finish: Powdercoated or Anodised
  • All balustrade glazing complies with AS1288 2006 of the Building Code of Australia.
  • All balustrades conform to AS 1170 & 1170.01 – 2002 of the Building Code of Australia.

Design 7 system is suitable for installation on:

CONCRETE -Base Plates

80x60x16mm inverse-bolted base plates attached to 45x45mm square 6351-T6 structural alloy post using 4xM8 stainless steel bolts into tapped threads. Post assembly to be mounted using 12mm stainless steel studs chemically anchored in concrete to a minimum depth of 100mm using Hilti HIT 150 epoxy mortar or equivalent.

CONCRETE -Cored

45x45mm square 6351-T6 structural alloy post to be cored into concrete to a minimum depth of 90mm using non shrink grout, epoxy mortar or equivalent.

TIMBER -Deck Plates

80x60x16mm inverse-bolted base plates attached to 45x45mm square 6351-T6 structural alloy post using 4xM8 stainless steel bolts into tapped threads. Post assembly to be bolted to underfloor timbers using 2x10mm stainless steel coach screws outside post dimensions.

Design 7 OvalToprail square post 640px

Top Rail Profiles

Railsafe toprails 640px